Support

Superbuy Live Support
www.superbuy.my
 
FiiO X5 2nd Gen Premium Music Player with Native DSD Decoding
100%
Authentic
1
Year
Warranty
By Fiio

FiiO X5 2nd Gen Premium Music Player with Native DSD Decoding 
   (Write a Review) |
Item No.:340086 FIIO-X5
  
Our Price: 
RM 1,299.00 (USD 295.90)
Superpoint 
1226 points
 
Brand:
Stock:
Available  
Delivery within 3 - 5 working days
Your Preference:
Quantity:
Add to watchlist


Product Description

One small step in your eyes, one giant leap for your ears.

FIIO-X5(1)

All New X5 2nd gen-native DSD decoding, more musical, more portable.

Good sound comes from a quality power supply

14V power supply for best power in class, up 40% from last gen

FIIO-X5(2)

To improve sound quality, the all-new X5 employs seamless voltage switching between different gain levels.

At high gain, the working voltage reaches 14V (±7V), 40% higher than the 1st gen X5, putting the opamps in their best working voltage, greatly increasing dynamics. At low gain, the working voltage is adjusted to ±5V, reducing power consumption, increasing runtime.

Native DSD128 decoding

Discrete analog volume control, SACD ISO direct decoding

FIIO-X5(3)

The all-new X5 utilizes an all-new digital audio architecture JZ4760B+SA2000+PCM1792A+PGA2311A, and is able to decode native DSD64 / 128, and directly play SACD ISOs. Other lossless formats such as WAV, FLAC, APE, WMA, ALAC, AIFF, etc. are also supported at up to 192 kHz / 24 bit. To avoid interpolating the DSD signal for volume control, we added Texas Instruments' best analog volume controller PGA2311A, ensuring the most faithful reproduction of DSD while avoiding issues with knob potentiometers such as channel imbalance and poor durability.

Only the best parts

Synergistic combination of flagship components

FIIO-X5(4)

The all-new X5 preserves the top-flight PCM1792A from Texas Instruments, coupled with the new OPA1652, with great dynamic performance and FET inputs for I / V conversion, realizing extra-low distortion (0.00005%) and noise.

Also utilizing two top-flight OPA1612 for lowpass filtering and voltage amplification for extra-low distortion (0.000015%) and noise (1.1 nV / √Hz ). Finally, to attain sufficient driving current for wide sound stage, highly-dynamic musical performance, and good bass power, the headphone output stage employs two BUF634U for current buffering, supplying up to 250mA current output (67% improvement over X5 1st gen).

Dual crystal oscillators supplying the most precise timing

Timing-the basis of digital audio

FIIO-X5(5)

The all-new X5 employs two silicon crystal oscillators, handling multiples of 44.1kHz (44.1 / 88.2 / 176.4kHz, DSD64 / 128) and 48kHz (48 / 96 / 192kHz) respectively. Moreover, it employs the SiTime MEMS oscillator made in USA; compared to traditionall quartz oscillators, it has a wider working temperature range and jitter within 1ps, improving accuracy by 25 times

From "off' to on in 0 seconds flat

Deep-sleep standby for instant-on music in everyday use

FIIO-X5(6)

On the basis of the X5, we applied the newest technology from the likes of smartphones onto the all-new X5. Through the engineers' efforts, the all-new X5 successfully reduced standby power consumption to <5mA, so that it may remain in standby for about 4 weeks from a full battery.

Lighter, smaller, more ergonomic

FIIO-X5(7)

FIIO-X5(8)

As a portable product, "portability" is always an important criterion to strive for.

Through our engineers' efforts.' we packed the above-mentioned more advanced and complex circuitry into a 15% lighter, 12% smaller package than the X5 1st gen.

FIIO-X5(9)

To further benefit portable usage, the all-new X5 also supports headsets with CTIA-standard in-line remotes, allowing operations such as play / pause, skip, fast forward and rewind to be controlled remotely.

FIIO-X5(10)

The all-new X5 also inherits various helpful design touches that we learned from previous models, such as the 3 closely spaced but unique side control buttons-recessed power button, raised volume+ button with tactile dot, and raised volume-button without tactile dot together allow speedy unsighted control without risk of mis-press. The status LED has been moved to the side to avoid glare in usage. Various control schemes allow flexible control of the player even while the screen is off.

FIIO-X5(11)

The all-new X5 also supports 10-EQ and user-defined playlist (m3u / m3u8), and can switch between 5 different display themes on the same firmware.

Supported formats

DSD Supporting DSD64 / 128 ( .iso &.dsf &.dff), excluding DST coding.
APE Up to 24bit / 192kHz (Fast)
Up to 24bit / 96kHz (Normal)
FLAC Up to 192 kHz / 24 bit at all compression levels
ALAC Up to 192 kHz / 24 bit
WAV Up to 192 kHz / 24 bit
AIFF Up to 192 kHz / 24 bit
WMA Up to 96 kHz / 24 bit
AAC Supporting AAC as used in Apple's iTunes, iPhone, iPod, iPad, etc.
OGG Supported
MP3 Supported
MP2 Supported

Main features

Firmware upgrade Via micro SD card (formatted in FAT32)
Data transfer Micro USB2.0 High Speed
Song playback Supporting browsing and playback via folders, All songs, Albums, Artists, Genres, Favorites and Playlists
Asynchronous USB DAC Supporting up to 24bit / 192kHz and DSD (driver installation required)
Play mode Sequential / Shuffle / Loop single / Loop all
Resume after poweroff Can resume from last song or last position before poweroff
Library management Supports adding and managing Favorites, Playlists (m3u / m3u8) on player; supports deleting Favorites, Playlists, songs and folders on player; supports batch deletion
Hibernation Player can automatically enter hibernation for instant wakeup / playback with minimal battery drain
Screen saver Custom defined screen timeout time
CUE Sheet Supported Supports splitting songs by CUE sheets and skipping through tracks within cuesheet
Themes 5 different built-in themes
Playback display Supporting embedded / external / folder-based album art, lyrics and ID3 display
Gapless playback Supported
Volume control 120 steps digital potentiometer
Output protection Power supply safety control over analog circuit
Gain setting Switchable between high and low gain
Equalizer 10-band equalizer (±6dB)
Hearing protection Playback pauses on headphone disconnection
Balance Max bias 10dB L / R, in 1dB increments
On / off transients Output relay prevents on / off transients
Headphone detection Playback pauses on headphone disconnection
Internal battery 3300 mAh 3.7V Li-polymer
Charging current 450mA via computer USB port (charging time approx. 8h)
1.1A via 2A USB charger (charging time approx. 3h)
Battery Life > 10 h (32Ω; normal volume with display off )
Chips used SoC: JZ4760B, DAC: PCM1792A, LPF: OPA1612 , OP: OPA1612 + BUF634

Packaging and accessories

Packaging Cardboard package box
Cables 1m high-current micro USB data / charging cable, 3.5mm coaxial S / PDIF adapter
Clear case Transparent
Screen protectors 2 included (1 applied in-factory)
Paper documents Quick reference sheet, quick start guide, warranty card
Bodywork stickers 3 sets (USA flag, wood grain, carbon fibre)

Frequency Response diagram of curves.
Test condition: Gain=High, 0dB, Lineout(10k ohms loaded)
Green curve: Left channel, Blue curve: Right channel

FIIO-X5(12)

Frequency Response diagram of curves.
Test condition: Gain=High, VOL=MAX, Headphone output (33 ohms loaded)
Green curve: Left channel, Blue curve: Right channel

FIIO-X5(13)

Distortion diagram of curves.
Test condition: play -5 dB sinusoidal signal, DSD, Headphone output.

FIIO-X5(14)

Distortion diagram of curves.
Test condition: play-5 dB sinusoidal signal, Line output

FIIO-X5(15)

Distortion diagram of curves
Test condition: play-5 dB sinusoidal signal, PCM, Headphone output.

FIIO-X5(16)

Distortion diagram of curves.
Test condition: play-5 dB sinusoidal signal, PCM, Line out.

FIIO-X5(17)

FIIO-X1(banner)




 Customer Reviews on FiiO X5 2nd Gen Premium Music Player with Native DSD Decoding

 There are no reviews for this product. Be the first one to share your opinion!

Create your review 


Question and Answer on FiiO X5 2nd Gen Premium Music Player with Native DSD Decoding 


(0) Q & A on FiiO X5 2nd Gen Premium Music Player with Native DSD Decoding   
Ask a Question


Recently Viewed


 
General
Colors Titanium / Black / Gold
Dimensions 109 x 63.5 x 15.3 mm
Weight 165g
Shell Material Aluminium alloy
Display Screen 2.4", 262,144 color HD IPS screen with 400 x 360 pixels
Line Out Standard 3.5mm Port (Shared line out / S / PDIF coaxial out)
Digital Out (Coaxial) Standard 3.5mm Port (Shared line out / S / PDIF coaxial out)
USB DAC Supporting up to 24bit / 192kHz and DSD (driver installation required)
Headphone Port Standard 3.5mm Headphone Port
Drive Ability 16~150 Ω
Volume Control 120 steps digital potentiometer
Equalizer 10-band equalizer (±6dB)
Treble N/A
Bass N/A
Balance 10 dB
Gain 3.6dB (Gain=L)
9.1dB (Gain=H)
Partial Performance Parameters for Line Output
THD+N <0.001% (1 kHz)
Frequency Response 10 Hz~65 kHz (-3dB)
Crosstalk >115 dB (10 KΩ / 1 kHz)
SNR ≥114 dB (A-weight)
Dynamic Range >110 dB
Line Output Level 1.53 Vrms (10 KΩ / 1 kHz)
Partial Performance Parameters for Headphone Output
Output Power 1 >245 mW (32Ω // THD+N<1%)
Output Power 2 >436 mW (16Ω / THD+N<1%)
Output Power 3 >27 mW (300Ω / THD+N<1%)
Frequency Response 10 Hz~65 kHz (-3dB)
SNR ≥117 dB (A-weighted)
Output Impedance <0.2 Ω (32Ω)
Crosstalk >75 dB (1 kHz)
THD+N <0.001% (1 kHz)
MAX Output Voltage >8.2 Vp-p
MAX Output Current >250 mA (For reference)
Power and Battery
Power DC5V 2A recommended
Charge Display Blue in processing, red light indicates, green light turns on after fully charged
Battery Life ≥10 h
Battery Capacity 3300 mAh
Battery Display Yes
Charging Time <4 h (DC5V 2A)
Battery Life Test Conditions
Screen OFF
Volume 56
Gain L
Load M3 open earbuds (27 Ω)
EQ OFF
Test File MP3 44.1kHz / 16bit
Audio Formats Supported
Lossless DSD: DSD64, DSD128 (.iso&.dsf & .dff);
APE(Fast): 192 kHz / 24 bit;
APE(Normal): 96 kHz / 24 bit;
APE (High): 96 kHz / 24 bit;
AIFF: 192 kHz / 24 bit;
FLAC: 192 kHz / 24 bit;
WAV: 192 kHz / 64 bit;
WMA Lossless: 96 kHz / 24 bit;
Apple Lossless: 192 kHz / 24 bit;
Lossy compression MP2, MP3, AAC, WMA, OGG...
 
Our operation hours is 9 am to 6 pm Monday to Friday,we'll back to you in normal business hours.
Q & A: FiiO X5 2nd Gen Premium Music Player with Native DSD Decoding   
Ask a Question
 


Step 1: Browse/Search Product

Browse and select the product that you are interested through product category or product search.

Step 2: Add to Cart

Click the “Add to Cart” button to add items to your shopping cart and click the “Continue Shopping” button if you would like to continue shopping.

Step 3: Checkout & Login

If you are a first time purchaser you are requested to create an account with SuperBuy during the CheckOut. If you are an existing user, please login to complete the CheckOut. 

Step 4: Select Shipping Method

Select the desired shipping method, such as Poslaju or self-collect. (Note: Some items might use other courier services other than Poslaju. For self-collect, please contact us before you come to collect the items.)

Step 5: Select Payment Method

Select the payment method. We accept credit cards (Visa/Mastercard), Maybank2U, CIMB online, EPP, PayPal. You must then confirm the payment.

Step 6: Complete

The order is completed and you may print the receipt as a record.

 

You may also interested in :
scanitmobile
How QR Codes work
1. Get a free QR Barcode Scanner App for your smartphone
2. Point your phone to scan the code
3. Scan and Share it!