Support

Superbuy Live Support
www.superbuy.my
 
Grow N Up Qwikfold Cycle Trike - BBGNU1013
100%
Authentic
Grow N Up Qwikfold Cycle Trike - BBGNU1013 
   (Write a Review) |
Item No.:291173 BBGNU1013
  
Normal Price: 
RM 264.89
On Sale For: 
RM 204.00 (USD 46.47)
Save: 
RM 60.89 (23.0%)
Superpoint 
193 points
Brand:
Stock:
Ready Stock  
Delivery within 48 hours
Your Preference:
Quantity:
Add to watchlist

Product Description

2 in 1 ride on: Easy Conversion from Trike to Chopper. 3 Adjustable Seat Position for growing kids. Fold up for "on-the-go" and Compact Storage. It’s easy to assembly. Secured locking Mechanism in each position.

Recommend rider of cycle trike: 2 - 4 years
Recommend rider of chopper: 4 - 7 years

Features

  • Weight: - 4.58kg
  • Retail Box Dimension: - 24.8"L x 8.8"W x 18.1"H
  • Product Dimension(Trike): 20.9"W x 20.5"D x 23.1"H
  • Product Dimension(Chopper): 20.9"W x 33.7"D x 19.9"H

Part List

  • A - Trike body (1 pcs)
  • B - Rear wheel (2 pcs)
  • C - Straight shaft (1 pcs)
  • D - Locking ring (1 pcs)
  • E - Ring assembly tool (2 pcs)
  • F - Rear wheel cap (2 pcs)
  • G - Trike head (1 pcs)
  • H - Turning shaft (1 pcs)
  • I - Screw nut (1 pcs)
  • J - Screw nut cap (1 pcs)
  • K - Washer (1 pcs)
  • L - Pedal hub (4 pcs)
  • M - Pedal shaft (1 pcs)
  • N - Front wheel (1 pcs)
  • O - Pedal (2 pcs)
  • P - Fork cover L (1 pcs)
  • Q - Fork cover R (1 pcs)
  • R - M4 screw (4 pcs)
  • S - Chopper seat back (1 pcs)

Assembly Instructions

  • Adult assembly required.
  • This product contains sharp points and small parts which are necessary for assembly. Prior to and during assembly of this product, keep small parts out of children’s reach. Small parts pose a hazard to children under 3 years.
  • Always use safety glasses and wear protective gloves during the assembly process.
  • Tools required for assembly: Hammer, Wrench, Phillips / cross-head screwdriver and wood block (all not included).

Do Not Discard: Important Literature Please Read Instructions Carefully And Indentify All Parts Before Assembly.

  1. Hold the straight shaft (C) in vertical position with the pre-assembled locking ring facing down. Insert the center hole o. a rear wheel (B) (indente. side facing down) through the straight shaft. Then, slide the trike body (A) through the holes on both sides of the rear to the straight shaft. Insert th. other rear wheel (indented side facing up) through the shaft.
  2. Maintaining the same position, place a ring assembly tool (E) underneath the pre-assembled locking ring. Now, put the locking ring (D) on top of th. exposed end of the other side of the straight shaft. Make sure the convex side of the locking ring is facing up towards the ring assembly tool a. shown. Then, place the other ring assembly tool (E) on top of the locking ring. Gently tap the top ring assembly tool with a hammer until the lockin. ring is secured. Pull the rear wheels to check that these are securely assembled.
  3. Insert the rear wheel caps (F) onto both rear wheels. Make sure the tabs fit into the slots on the rear wheels.
  4. Turn the trike body upside-down. Align the goose neck of the trike body into the middle of the trike head (G). Make sure the trike head is also turne. upside-down. Slide the turning shaft through holes of the trike head and body. Using a hammer, tap gently at the end of shaft until it flush. Place th. washer (K), screw nut cap (J) and screw nut (I) through the other end of the turning shaft. Fully tighten the turning shaft and the screw nut securel. by using a Phillips screwdriver and a wrench. Fold and close the screw nut cap over the screw nut and make sure the screw nut is completely hidden.
  5. Fit two pedal hubs (L) onto the pedal shaft (M) tabs. Make sure the tabs fit into the slots of each pedal hub.
  6. Take the pedal hubs on the pedal shaft and insert it through the hole in the center of the front wheel (N) until they are flush with the surface of th. front wheel.
  7. Gently tap the remaining two pedal hubs (L) into the center hole on the other side of the front wheel until they are flush with the surface of the front wheel.
  8. Place a pedal (O) at the end of the pedal shaft, gently tap the pedal with a hammer until it is secured. Pull the pedal t. check if it is locked in place. Repeat this procedure to attach the other pedal (O).
  9. Place the front wheel assembly onto the grooves of the fork of the trike head. Tighten the assembly with the fork cover L (P) by 2 pcs M4 screws(R). . Make sure the fork cover L is placed on the left side. Repeat this procedure to attach the fork cover R (Q).
  10. There are 3 adjustable seat positions for chopper. Choose the appropriate position and slot in the chopper seat back (S).
  11. Before applying the label, wipe the surface of the trike body with a clean, dry cloth to remove any dust.

Safety and Maintenance

  1. Before use, please check that all parts are assembled securely.
  2. Please carry out checks periodically to the unit regularly for any worn out parts.
  3. To clean this product, use a mild soap and water solution and clean cloth. Rinse clean with water to remove soap residue.
  4. DO NOT leave the trike outside in the rain. Keep dry always.

To Prevent From Fall

  • Always check that the folding latch is locked securely before each use and before / after each change of position.
  • NEVER allow more than one rider at a time.
  • Maximum weight limit is 70 lbs (32 kg).

Warning

  • To avoid serious injury - DO NOT use near cars or other motor vehicles, near streets, steps, stairwells, sloped driveways, hills, roadways, alleys, swimming pools or other bodies of water.
  • Continuous adult supervision required.
  • Always wear shoes or sneakers to prevent injury when riding this toy.
  • Recommend that child wear a bike helmet when using this toy.
  • Please keep hands, feet, loose clothing and long hair away from the wheels when riding this toy.
  • DO NOT ride this toy in wet weather.

Caution

  • Adult assembly required.
  • This product contains sharp points and small parts which are necessary for assembly. Prior to and during assembly of this product, keep small parts out of children’s reach. Small parts pose a hazard to children under 3 years.
  • Always use safety glasses and wear protective gloves during the assembly process.
  • Tools required for assembly: Hammer, Wrench, Phillips / cross-head screwdriver and wood block (all not included).
  • To Convert Into Chopper/Trike Or To Fold-up -  Always turns this toy upside-down for each change of position. Failure to do so could result in serious injury.
  • DO NOT allow children to reach the folding latch, it contains sharp points and potential entrapment. Folding mechanism poses laceration and amputation hazards.




 Customer Reviews on Grow N Up Qwikfold Cycle Trike - BBGNU1013

 There are no reviews for this product. Be the first one to share your opinion!

Create your review 


Question and Answer on Grow N Up Qwikfold Cycle Trike - BBGNU1013 


(0) Q & A on Grow N Up Qwikfold Cycle Trike - BBGNU1013   
Ask a Question


Recently Viewed


 
No Data.
 
Our operation hours is 9 am to 6 pm Monday to Friday,we'll back to you in normal business hours.
Q & A: Grow N Up Qwikfold Cycle Trike - BBGNU1013   
Ask a Question
 


Step 1: Browse/Search Product

Browse and select the product that you are interested through product category or product search.

Step 2: Add to Cart

Click the “Add to Cart” button to add items to your shopping cart and click the “Continue Shopping” button if you would like to continue shopping.

Step 3: Checkout & Login

If you are a first time purchaser you are requested to create an account with SuperBuy during the CheckOut. If you are an existing user, please login to complete the CheckOut. 

Step 4: Select Shipping Method

Select the desired shipping method, such as Poslaju or self-collect. (Note: Some items might use other courier services other than Poslaju. For self-collect, please contact us before you come to collect the items.)

Step 5: Select Payment Method

Select the payment method. We accept credit cards (Visa/Mastercard), Maybank2U, CIMB online, EPP, PayPal. You must then confirm the payment.

Step 6: Complete

The order is completed and you may print the receipt as a record.

 

You may also interested in :
scanitmobile
How QR Codes work
1. Get a free QR Barcode Scanner App for your smartphone
2. Point your phone to scan the code
3. Scan and Share it!