Hello
|
|
|
| Price | : | RM 419.00 |
| Discount Price | : | RM 390.00 |
| Save | : | RM 29.00 (6.92%) |
 |
: | 390 points |
| Brand | : | Panasonic |
Delivery within 2-4 working days
|
|
Product Description
Panasonic Faucet Water Purifier
.jpg)
Enjoy Clear Water and Save Money with Just 1 Cartridge
MicroClear4000 cartridge can purify 4,000 L of tap water. With this, you can replace and save money for 4,000 of 1 L plastic bottles a year.
If you use 10 L per day, the cartridge can last for one year, so you don’t have to replace the cartridge so often.
1 Cartridge = 4,000 of 1L Bottles
.jpg)
4-stage Filtration Removes 17 Substances and Bacteria
Purified Water
Micro Clear 4000 Cartridge
.jpg)
Simulation of Chlorine Removed from Tap Water
Discover the performance of the 4000 L long-life cartridge.
Removal of 17 Substances
Free residual chlorine/ Turbidity/ Total trihalomethane/ Bromodichloromethane/ Dibromochloromethane/ Bromoform/ Tetrachloroethylene/ Trichloroethylene/ CAT (agricultural chemicals)/ 2-MIB (mould odour)/ Soluble lead/ Benzene/ Geosmin (musty odour)/ Phenols/ Carbon tetrachloride/ Iron (fine particles)/ Aluminium (neutral).
99.999% of Bacteria Are Removed
4-stage water purification system eliminates 99.999% of bacteria and was verified by the Japan Food Research Laboratories.
In a general bacteria elimination test performed at the Japan Food Research Laboratories with a cartridge used in a Panasonic product.
Tested bacteria: Brevundimonas diminuta
.jpg)
Increased High Performance Activated Carbon 170%!
The MicroClear4000 cartridge contains 51 g, 170% of high performance activated carbon which is made from our unique technology. This delivers high purification performance and longer cartridge life.
.jpg)
Comparison of Activated Carbon: Large Adsorption Area with Nano-sized Pockets
NEW: Increase of surface area is made by nano-sized pocket for more removal
Original technology creates nano-sized pocket that is small as 1 nm which removes 13 impurities, including the fine chemical trihalomethane. Creating more nano-sized pockets and surface area increases the removal of impurities.
.jpg)
Conventional: Relatively less of nano-sized pockets
Relatively large nano-sized pocket makes it difficult to adsorb impurities. Those large pockets do not have many nano-sized pockets to adsorb impurities, so the amount of impurities that can be removed is also small.
.jpg)
Comparison of Activated Carbon: Renewed Special Surface Treatment
NEW: Special surface treatment prevents impurities from escaping
Our unique surface processing technology has succeeded in creating an appropriate air layer in the nano-sized pocket. Impurities contained in water are released into the air and easily adsorbed on the activated carbon surface.
.jpg)
Conventional: Relatively difficult to adsorb impurities on the surface
If there is no air layer in the nano-sized pocket, some impurities can’t be adsorbed on the activated carbon surface. If the air layer is too thick, impurities in the water cannot be released into the air layer.
.jpg)
Features for Easier Use
Easy Water Flow Switch
The water flow can be switched with a simple operation. Pictograms reduce switching mistakes.
.jpg)
Easy to Clean Detachable Cover of Tap Water Outlet
The shower part where water stains tend to clog is removable, it can be easily cleaned at any time.
.jpg)
Easy Cartridge Replacement
Cartridge replacement is completed in just 2 easy steps. Rotate the cartridge counter-clockwise and pull to remove it, then do the opposite to install.
.jpg)
Purified Water Output Volume 1.8 L / min
With an output of 1.8 L / min, you can always use clean water without stress.
.jpg)
Get Inspired
| Dimensions (width x depth x height) | 125 mm (W) x 110 mm (D) x 75 mm (H) |
| Weight | Approx. 310 g (Approx. 450 g when full of water) |
| Water temperature when using the main unit | Purified Water : Under 35 °C (Unpurified/shower : Under 80 °C) |
| Minimum usable dynamic water pressure | 70 kPa |
| Filtration flow volume | 1.8 L / min [At water pressure 100 kPa] |
| Cartridge installed in the unit | TK-CJ600C-EX |
| Purification capacity | |
| Free residual chlorine | 4000 L *1 |
| Turbidity | 4000 L *2 |
| Total trihalomethane | 4000 L *1 |
| Bromodichloromethane | 4000 L *1 |
| Dibromochloromethane | 4000 L *1 |
| Bromoform | 4000 L *1 |
| Tetrachloroethylene | 4000 L *1 |
| Trichloroethylene | 4000 L *1 |
| CAT (pesticide) | 4000 L *1 |
| 2-MIB (mold smell) | 4000 L *1 |
| Soluble lead | 4000 L *1 |
| Benzene | 4000 L *1 |
| Geosmin (mold smell) | 4000 L *1 |
| Phenols | 4000 L *1 |
| Carbon tetrachloride | 4000 L *3 |
| Removable substances | |
| Iron (particulate form) | Can be removed. *4 |
| Aluminum (neutral) | Can be removed. *4 |
| Replacement timing guideline for the filter (cartridge) | Approx. 1 year (10 L of purified water used a day) [Approx. 6 months (20 L of purified water used a day)] *5 |
| Type of material used | ABS resin |
| Filter material | Non-woven fabric filter, Activated carbon, Ceramic, Hollow fiber membrane |
| Components which cannot be filtered out | Iron dissolved in water, heavy metals (silver, copper, etc.), salt (seawater) |
There are no reviews for this product. Be the first one to share your opinion!
|
|
|
|
|
| Question |
*Maximum length: 250 characters
|
|
|
|
No Q&A for this product.
You have successfully added item into your shopping cart!
To The Top